Nimco

CV112

Two spool compact special loader valve with built in load holding check valves for each spool section. Designed for minimal spool leakage less than 1cc/min and optimal load controls on small front end loaders.


Flow Range50 Lpm or 13 Gpm
Pressure320 bar or 4600 psi
Port SizeBSP 3/8 or SAE 6 or SAE 8
ControlManual, Joystick, Cable, EHP
OptionsHPCO


CV152

Two spool front loader valve for small- and midsized loaders with exceptional low spool leakage. Possibility to fit all pump, cylinder and tank ports in one direction for Open center or Load Sensing systems.


Flow Range70 Lpm or 18 Gpm
Pressure320 bar or 4600 psi
Port SizeBSP 3/8 or SAE 6, BSP 1/2 or SAE 8
ControlManual, Joystick, Cable, EHP
OptionsHPCO


CV432

The two spool CV432 is designed for medium to large loaders and for open center and series flow operation with minimum spool leakage.


Flow Range100 Lpm or 26 Gpm
Pressure320 bar or 4600 psi
Port SizeBSP ½ or SAE 8, BSP 3/4 OR SAE 10
ControlManual, Joystick or Cable
OptionHPCO, Quick Coupler Unit


CV452

Special two spool valve for large loaders with the possibility to fit all pump, cylinder and tank ports in one direction. Designed for Open Center Load Sensing Systems.


Flow Range110 Lpm or 29 Gpm
Pressure320 bar or 4600 psi
Port SizeBSP ½ or SAE 8 or 10
ControlManual, Joystick, Cable
OptionsAntichock, Anticavitation, HPCO, Quick Coupler


EPCV452

EPCV452 is the Electrical Proportional Version of the CV 452 and comes in an open center version, a load sensing version for standard stand by pressure and for low stand by pressure.


CV652

Special two spool valve for large loaders, with a uniquely soft load control.


Flow Range120 Lpm or 32 Gpm
Pressure320 bar or 4600 psi
Port SizeBSP 1/2 or 3/4 or SAE 8 or 10 or 12
Control OptionManual, Joystick, Cable
OptionsAntichock, Anticavitation, HPCO, Quick Coupler